The strength of the Pre Engineered Building system lies in its ability to incorporate a large number of structural sub-systems like Cranes, Canopies, Fascias, Partitions, Roof monitors, Roof extensions, Bracings, Jack beams, Expansion joints, Mezzanines, etc., We use standard components and standard design approaches to satisfy a wide range of client requirements.
These structural subsystems fulfill the requirements of two type’s viz. Aesthetic and Functional. They produce a large number of structural subsystems
End wall Roof Extension:
According to exact specifications as the strength of the pre-engineered building system depends largely on various incorporated structural subsystems. Subsystems are available for following structures
End wall roof extensions consist of end wall panel, Roof panel, Gable trim, soffit panel, and end wall rafter. The end wall is extended to an extent under end wall panel support.
Sidewall Roof Extension:
The sidewall roof extension has the same assembly but the soffit panels are above the Roof Extension Rafter.
Centre Curved Fascia:
The centre curved fascia consist Backup panel, soffit panel. It is an assembly of Cap flashing, Fascia panel with valley gutter or eave gutter on the rafter with rigid frame support.
Bottom Curved Fascia:
The entire assembly of Centre curved fascia contains for the Bottom curved Fascia a slight change in Connection of wall panel to Frame.
Top and Bottom Curved Fascia:
In this the assembly is a combination of Top Curved Fascia which has curvature at top and bottom curved Fascia having bottom Fascia.
The roof platform has Grating on above and roof panels on the sides.